FT-62-U3HC02AR 高速集线器

与普通USB3.0集线器相比,该款产品可将连接于下行端口的USB2.0/1.1/1.0设备的传输转化为USB3.0 SuperSpeed 传输,并允许其分享SuperSpeed上行带宽。 基于SuperTT技术,FT-62-U3HC02AR只接纳上行端口的高速传输通道,可利用有源光缆便当地将USB 2.0/1.1/1.0设备的传输距离扩展至100米以上。

10Gb/s SFP+ 1550nm 120km Optical Transceiver Module
F-tone Networks's 10Gb/s SFP+ 1550nm 120km Optical Transceiver Module： SFP+ optical transceivers are designed for use in 10Gb/s data rate over multimode fiber. They are compliant to SFF-8472 Rev 12.1 and SFF-8402, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The product is RoHS compliant and lead-free per Directive 2011/65/EU and F-tone Networks Application Note FTAN-2015038.

F-tone Networks 100G CFP2 to QSFP28 Adapter

F-tone Networks’sF-tone Networks 100G CFP2 to QSFP28 Adapter are designed for use in 100 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the QSFP28 MSA, IEEE 802.3ba  QSFP+ Breakout to SFP+ Cage Converter and IEEE 802.3bm CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details

QSFP+ Extender (up to 80KM or I00KM)

F-tone Networks’s QSFP+ Extender (up to 80KM or I00KM) are designed for use in 100 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the QSFP28 MSA, IEEE 802.3ba QSFP+ Extender (up to 80KM or I00KM) and IEEE 802.3bm CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details.

100GBASE-SR4 QSFP28 to 2x QSFP28 Active Optical Cable

F-tone Networks’s 100GBASE-SR4 QSFP28 to 2x QSFP28 Active Optical Cable are designed for use in 100 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the QSFP28 MSA, IEEE 802.3ba QSFP+ Extender (up to 80KM or I00KM) and IEEE 802.3bm CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details.

测试板特点
● 专业仿真团队设计，信号质量优异
● 支持 QSFP28 和 QSFP+光？榈牟馐
● 支持 4V 或 3.3V 供电
● USB 接口直接会见？
● 可使用电源适配器直接供电
● 支持板上电流检测